Contour shuttle fusion 360 how to#
Contour shuttle fusion 360 pro#
Contour shuttle fusion 360 software#

Cutting Feedrate: This is the primary value used to dictate how fast your CNC tries to slice through your project.

Anything over that $30 value just defaults to Max Speed. So 1000 = Max speed and 500 = half speed. As one might expect, this setting dictates how fast your spindle will turn, but setting it to 1000 does not equate to 1000 RPM, but rather is relative to the $30 value in your GRBL settings.

Spindle Speed & Ramp Spindle Speed: For the sake of simplicity, make a habit of setting both of these settings equal to one another.

There are a lot of features you can modify, enable or disable but for the sake of this quickstart guide we will focus on the essentials: In the first tab, after you have selected your end mill, you will need to alter all of the feeds and speeds settings based on a variety of factors. First, in the “Tool” tab, click on “Select tool…” and pick a 1/8” end mill from one of the stock libraries, or make a new tool yourself. From there, you will need to enter the parameters to define the cut, which are listed in a tab format just like the Setup. To start making your cut around 2D parts, go to the “2D” drop-down menu and select the “2D Pocket” operation. With your WCS looking like the above image and your stock dimensions set, you can select ok and move on to creating toolpaths. In this case, we already know the Z height (.72” on Z Axis) from our measurements earlier, and now you can measure your stock’s length (4” on Y Axis) and width (7” on X Axis).

Under the Mode selection, I suggest using “Fixed Size Box” to fully define your stock materials. Once your project looks like the above you can go to the Stock tab and modify the dimensions of the stock material. For ease of use, many people select the bottom left corner like the above, and you want to make sure that the blue Z arrow is pointing upwards, and that X & Y are hugging your work piece. For the most part just think of this as where the bit will be placed before you tell your machine to start cutting. The most important part of the setup process is figuring out where your Work Coordinate System (WCS) will start from. You will see a translucent box show up around your model, this represents the stock material that you will be placing in your Machine. The First focuses on making 3D models, while the second is meant to help turn a digital model into a real physical product.ĭirectly to the right of the Manufacturing tab is the Setup button, start by clicking it and the above menu should pop up. It is wise to think of each of those tabs as separate programs, with Design being for CAD (Computer Aided Design) purposes while the Manufacturing tab is CAM (Computer Aided Manufacturing). The first step in this process is (with your model visible) to go from the “ Design ” to “Manufacturing” tab in the top-left corner of the program.Īs you do so, you will see the interface change. Just like you have to set the table before you have dinner, so do you need to set up a workspace in Fusion 360 in order for your machine to know what you want it to do. SainSmart Genmitsu CNC Router 3018-PROVer Kit.SainSmart Genmitsu CNC Router 3018-PRO DIY Kit.

Contour shuttle fusion 360 pro#

Some of the basics like selecting thing stump me Thankful for this forum.Fusion 360 Quick-Start Guide for 3018 Pro & PROver CNC’s I can't believe how awesome this tool is.

Contour shuttle fusion 360 software#

I am a software engineer by education, but not a mechanical engineer. I've been at fusion for about 1.5 years part time and i'm just starting to figure things out. Maybe it is because the bit is the same size as the pocket - I am thinking - and it just ends up with empty tool paths. This doesn't seem to work for the truss rod or the fret slots. you just clicked the bottom of the pocket and boom it knew and selected the walls and everything. When i did the guitar body, it was very easy to select 2d pocket for the neck pocket and pickup routes. I think ill make a centre line in the sketch and trace that as a workaround or maybe if i use a bit smaller than the channel ill be able to use pocket?Īlso for the depth of the slot, you are using axial offset from the trace to determine this? (.11)? I used 'stock to leave' to try and make the bit path down the middle but it didn't do anything and stayed on the centre of the trace, which makes my channel twice as wide.

Contour shuttle fusion 360 how to#

I don't understand how the tool path is in the middle of the fret slot when you have selected the top edge as a trace? When i tried to use 2d trace on my truss rod channel, it set the middle of the bit on my trace and i couldn't figure out how to offset it.